Established in the year 1989, our business was started with in mind to cater for the growing needs of all electronics & electrical test and measuring equipments in Singapore. Beside handling sales and marketing for our products, we also provide value added services like repair and calibration for our range of products.
About CETM
Events & Exhibitions
Coming up....
Browse By Category
THERMOGRAPHY & TEMPERATURE
Thermography
Portable Industrial Thermometers
Stationary Industrial IR Cameras & Thermometers
NETWORK, TELECOMS & CCTV
Wifi Testers
Cabling Cerfications
Telecom Testers
HIGH VOLTAGE, UTILTIES & CABLING
Motor & Generator Testers
Cable Avoidance & Cable Locators
High Voltage Detectors
Cable Test Equipments
Circuit Breaker Test Equipments
Relay and Protection Testers
Transformer Testing Equipments
Insulation Test Equipments
Resistance & Battery Testers
Partial Discharge & Corona Detection
Earth/Ground Resistance Testers
RENTAL & CLEARANCE
Filter By
Filter By
Home
Subcategories
IDR0.00
(tax incl.)
Quick and easy way to ensure that 13A sockets are correctly wired, indicated by 3 bright long life LEDs.
IDR0.00
(tax incl.)
The John Drummond MTL10 gives safe indication of voltage between 50V and 500V AC and 50V to 750V DC
IDR0.00
(tax incl.)
The John Drummond MTL10 gives safe indication of voltage between 50V and 500V AC and 50V to 750V DC
IDR0.00
(tax incl.)
The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems.
This item is not available for online purchase....
IDR0.00
(tax incl.)
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that...
IDR0.00
(tax incl.)
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
IDR0.00
(tax incl.)
HVB10 is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables.
This item is not available for...
IDR0.00
(tax incl.)
The MJÖLNER Series is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links.
This item is not available for online purchase. Please...
IDR0.00
(tax incl.)
The Oil Tan Delta (OTD) is a laboratory instrument, which measures the Tan Delta, Resistivity and Relative Permittivity of insulating liquids. These tests give a wider picture of the overall quality of the insulating...
IDR0.00
(tax incl.)
Test and diagnostics system for medium-voltage cables
The VLF sine 45 kV with integrated tan delta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables.
IDR0.00
(tax incl.)
The MTO250 Transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the resistance of all types of magnetic windings safely and accurately. It tests transformers, shunt...
IDR0.00
(tax incl.)
The Baker DX series can apply a wide set of off-line electrical tests to assess the condition of motors and coils.
This item is not available for sale online. Please contact 62925161 or sales@cetm.com.sg for...
IDR0.00
(tax incl.)
Megger’s automatic laboratory oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids. Moulded test vessels give repeatable results with lock in precision electrode gap...
IDR0.00
(tax incl.)
MOM2 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind.
This item is not...
IDR0.00
(tax incl.)
The current input range can be extended by using external current transformers.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
IDR0.00
(tax incl.)
The SFX8-1000 and SFX5-1000 are a mobile, and economical fault locating systems, specially suited for the fault location in low voltage but also in medium voltage systems, for lighting system, pilot cables and for...
IDR0.00
(tax incl.)
The EGIL is an automatic timer and motion analyzer for medium- and high-voltage substation circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg for...
IDR0.00
(tax incl.)
Offering CAT IV, the MIT515 is the simplest of Megger's new range of small light 5 kV insulation resistance testers for the testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is...
IDR0.00
(tax incl.)
The InsuLogix® G2 provides early detection of faults in power transformers. By detecting and measuring both hydrogen and acetylene, the InsuLogix® G2 is the only monitor that a transformer operator needs to...
IDR0.00
(tax incl.)
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit.
This item is not available for online purchase. Please contact 62925161...
IDR0.00
(tax incl.)
The MOM200A is designed to check and measure contact resistances in highvoltage circuit breakers, disconnecting switches (isolators) and busbar joints.
IDR0.00
(tax incl.)
The SMRT410D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid state and microprocessor-based protective relays, motor overload relays, and similar...
IDR0.00
(tax incl.)
ICMmonitor is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is a compact, stand-alone instrument for evaluating the condition of medium and high voltage insulation. A built-in...
IDR0.00
(tax incl.)
CDAX 605 is a capacitance and dissipation factor test set to be used with an external power source/generator. It is a precision instrument using a combination of bridge and direct (vector) measurements and is capable...
IDR0.00
(tax incl.)
NetEP is a permanently-installed, fully automated machine system monitoring solution. It continuously acquires health and performance data on electric motors and the rotating machine systems they operate. With the...
IDR0.00
(tax incl.)
Test abilities of Megger’s proven IR test instruments adding DLRO four wire Kelvin low resistance test, inductance and capacitance tests to provide a versatile motor tester, all packaged in a robust hand held...
IDR0.00
(tax incl.)
Surge wave generators are, like reflectometers, an essential component of the cable fault location process. They are used for both prelocation and pinpointing.
This item is not available for online purchase. Please...
IDR0.00
(tax incl.)
MAGNUS™ permits you to prepare excitation curves for instrument transformers quickly and easily.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
Developed, after extensive customer research, specifically to meet the needs of today’s electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to...
IDR0.00
(tax incl.)
The PFL Series of cable fault locators provide a versatile, portable solution for advanced identification, prelocation, and pinpointing of cable faults on a wide variety of cable types.
This item is not available for...
IDR0.00
(tax incl.)
The MJÖLNER Series is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links.
This item is not available for online purchase. Please...
IDR0.00
(tax incl.)
This versatile instrument can provide test currents from 10 amps up to 200 amps subject to the load resistance and supply voltage. A large LCD displays all all test parameters and measurement results.
This item is...
IDR0.00
(tax incl.)
Portable stand-alone cable fault location unit for LV cable installations.
The SPG5-1000-1 is a comprehensive all-in-one-box fault locating solution, tailored for testing, identifying, converting, prelocating, and...
IDR0.00
(tax incl.)
The Digiphone plus pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive...
IDR0.00
(tax incl.)
Megger Baker Instruments designs and manufactures electric motor test systems for original equipment manufacturers (OEMs) that help ensure their motors and coils meet or exceed the quality expectations OEMs wish to...
IDR0.00
(tax incl.)
Megger’s automatic portable oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids.
This item is not available for sale online. Please contact 62925161 or...
IDR0.00
(tax incl.)
ICMsystem is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is usable over a range of frequencies of applied voltage, including power system frequency (50/60 Hz) and VLF (0.1 Hz).
IDR0.00
(tax incl.)
The PAM420 is specifically designed for measurements on electrical power systems.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing...
IDR0.00
(tax incl.)
The SG32-1500M Power Cable Fault locator is designed to provide quick, effective, accurate and safe fault location for 10 kV cables, thereby reducing system outages and minutes lost.
This item is not available for...
IDR0.00
(tax incl.)
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
IDR0.00
(tax incl.)
Offering CAT IV, the MIT525 is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. It is both smaller and lighter than its predecessor,...
IDR0.00
(tax incl.)
Power through transformer electromechanical tests with the new TTRU1, the latest handheld transformer turns ratiometer from Megger. Perform routine polarity validation and turn ratio tests on power, distribution, and...
IDR0.00
(tax incl.)
Weighing less than 33 kg the EZ-Thump series are the most portable fault location systems on the market. It utilises the “Easy Go” test system, which is easy to operate, interprets the results and requires minimal...
IDR0.00
(tax incl.)
The risk of overheating is becoming more serious due to the fact that today's distribution networks have to carry heavier loads. Checking contact resistances at regular intervals detects faults before they cause...
IDR0.00
(tax incl.)
Discharge testing is the only test method that provides a comprehensive insight into battery capacity, and is therefore an essential part of vigorous battery maintenance programmes.
This item is not available for...
IDR0.00
(tax incl.)
The main task of the partial discharge monitoring system type ICMmonitor CA is to detect internal partial discharge in power cables caused by cracks in joints and terminations or degradation in the insulation system...
IDR0.00
(tax incl.)
The MTO 300 series delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time for the user by testing all normal 6 windings without having to disconnect and reconnect leads...
IDR0.00
(tax incl.)
he PAT300 series will carry out all test requirements automatically with one button press.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
Engineer’s ultimate toolbox that addresses the increasing need for three-phase testing capability in electrical distribution substations, renewable power generation stations and industrial applications.
This item is...
IDR0.00
(tax incl.)
The Surge Wave Generator SWG 500 operates in the middle voltage range of the usual SWGs. While its surge energy is in the lower range, the three voltage ranges are switchable, which allows each voltage stage to use...
IDR0.00
(tax incl.)
These high-current supply units have two main fields of application.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
Offering CAT IV, the MIT1025 is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and...
IDR0.00
(tax incl.)
The Surgeflex unit is a mobile system for testing and fault locating on low and medium voltage cables.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry.
IDR0.00
(tax incl.)
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test system. Testing relays with SVERKER 650 also requires an extra timer if more than one timing cycle is to be...
IDR0.00
(tax incl.)
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations...
IDR0.00
(tax incl.)
Portable LV Cable Fault Location System
The M-Thump5 Portable Cable Fault Locating System provides safe, efficient, and extremely easy-to-use solutions for quickly identifying, pre-locating, and pinpointing various...
IDR0.00
(tax incl.)
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit. Possessing a measuring range up to 25,000 feet, the EZ-RESTORE OVERDRIVE...
IDR0.00
(tax incl.)
Megger® TDR2000/3, TDR2010 and TDR2050 are state of the art, dual channel, high resolution, compact Time Domain Reflectometers with a colour screen for locating faults on paired metallic cables.
All TDRs in this...
IDR0.00
(tax incl.)
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
IDR0.00
(tax incl.)
With the unique concept of the ICMflex instruments, the entire acquisition hardware is placed on high voltage potential right at the position where the signals are. Thus, no signal cables are needed, as the instrument...
IDR0.00
(tax incl.)
The FRAX series of sweep frequency response analyzers (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect.
This item is not available for sale online. Please contact...
IDR0.00
(tax incl.)
This item is not available for sale online. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry
IDR0.00
(tax incl.)
The DET2/3 is a robust and compact automatic earth (ground) test instrument designed to measure earth electrode resistance and soil resistivity. For use on large or more complex earth systems, which include...
IDR0.00
(tax incl.)
The SMART THUMP ST Series of cable fault locators provides safe, efficient and easy-to-use solution for quickly identifying, prelocating and pinpointing various types of cable faults for power cables. The ST Series...
IDR0.00
(tax incl.)
The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years’ experience of over 4,000 delivered breaker analysers. The modular construction makes it possible to configure the...
IDR0.00
(tax incl.)
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
IDR0.00
(tax incl.)
Weighing as little as 32 kg the EZ-Thump 3 kV is the first of its kind in the market and with updated EZ-Thump 4 kV this series are the most portable fault location systems specifically for shielded and unshielded low...
IDR0.00
(tax incl.)
MOM690™ supplements our family of microhmmeters. In addition to high current capacity, MOM690™ features microprocessor-based measurement, storage and reporting. The built-in software enables you to carry out an...
IDR0.00
(tax incl.)
Megger DLRO10HD measures low resistance values in applications ranging from railways and aircraft to resistance of components in industry.
IDR0.00
(tax incl.)
Analyzing the discharge activity requires the permanent installation of coupling devices. Preferably, such coupling devices are capacitive couplers terminated by a power separation filter.
Power Diagnostix standard...
IDR0.00
(tax incl.)
The MTO210 transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. It can test transformers and...
IDR0.00
(tax incl.)
Three new PAT testers with full database functionality based on the well received PAT300 series. The PAT 400 series introduces a new level of convenience and speed to PAT testing using onboard test results.
This item...
IDR0.00
(tax incl.)
TRAX is a multi-functional solution for transformer testing. It also adds several common substation testing functionalities, and ultimately replaces numerous individual testing devices.
This item is not available for...
IDR0.00
(tax incl.)
The Surge Wave Generator SWG 500 operates in the middle voltage range of the usual SWGs. While its surge energy is in the lower range, the three voltage ranges are switchable, which allows each voltage stage to use...
IDR0.00
(tax incl.)
The SVERKER750 and SVERKER780 Relay Test Set are the engineer's toolbox. The control panel features a logical layout, SVERKER 650 users will find it comfortably familiar and will be able to start work right away.
This...
IDR0.00
(tax incl.)
The Baker EXP4000 is a powerful tool, designed for site use, to analyse the motor running under its normal load. It tracks multiple data types to identify trends that indicate potential problems. Voltage and current...
IDR0.00
(tax incl.)
For customers who need more power and functionality with fault locating, Megger offers the Surgeflex25-1150 M. These systems are designed for the more frequent and experienced users. They offer the benefits of...
IDR0.00
(tax incl.)
When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation.
This...
IDR0.00
(tax incl.)
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations...
IDR0.00
(tax incl.)
The AVO®215 is a pocket sized multimeter that offers a wide range of functions in a small, rugged package. The 4000 count high contrast negative display, combined with a back light, provides the user easy to read...
IDR0.00
(tax incl.)
The Digiphone plus pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for high resistive...
IDR0.00
(tax incl.)
TDR1000/3 is a hand held, compact time domain reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and...
IDR0.00
(tax incl.)
The patented DualGround™ testing using the DCM module makes the testing safe and time saving by keeping the circuit breaker grounded on both sides throughout the test. The DCM module uses a measuring technology called...
IDR0.00
(tax incl.)
Online PD monitoring on rotating machines, transformers, cables, and especially GIS systems. It combines proven technology of the ICMmonitor with new processor technology and embedded hardware capabilities. The...
IDR0.00
(tax incl.)
IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that in an...
IDR0.00
(tax incl.)
DCM300E is designed mainly to check earth leakage currents. However, the upper range will measure currents of up to 300 A a.c. making it a totally versatile instrument capable of taking most current measurements.The...
IDR0.00
(tax incl.)
Megger MVCT test set is a lightweight, robust, portable unit capable of testing both current and voltage transformers.
IDR0.00
(tax incl.)
Is it possible to know in advance when a power failure will happen?
Can you reduce outage times to a minimum?
And: can you locate cable faults at all without disconnecting the consumer from the mains?
YES, Megger can....
IDR0.00
(tax incl.)
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg...
IDR0.00
(tax incl.)
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
IDR0.00
(tax incl.)
In many situations, conventional fault location is impossible, for example when the electrical supply cannot be disconnected or the necessary fault location system is temporarily unavailable.
This is where the...
IDR0.00
(tax incl.)
The DLRO-H200 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind. This...
IDR0.00
(tax incl.)
Over 20 years experience has led to the development of the Megger KF875 and KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site. The KF875...
IDR0.00
(tax incl.)
The SMRT1D incorporates the latest in digital signal processing and microprocessor-based technology to provide the most advanced yet, easy to use, single-phase relay test system on the market today. The SMRT1D is...
IDR0.00
(tax incl.)
The MTO106 transformer ohmmeter is an easy-to-use, line-operated instrument specifically designed for safe and accurate field measurement of winding resistance in smaller transmission and distribution transformers. It...
IDR0.00
(tax incl.)
The Baker AWA-IV automatically performs repeatable, user-programmable tests to thoroughly assess the strength of a motor’s insulation and circuit. In fact, it is the only high-voltage test instrument that a user can...
IDR0.00
(tax incl.)
Megger Ducter™ DLRO100 enables low resistance measurement, across multiple applications, in areas without access to mains power. The integral Li-ion battery supplies a constant 100 A current for up to 200 automatic or...
IDR0.00
(tax incl.)
Power Diagnostix ICMcompact provides a simple push-button interface and on-screen menus in an embedded LCD panel. The LCD display modes include a simple PD charge meter with adjustable “needle” sensitivity, monochrome...