Established in the year 1989, our business was started with in mind to cater for the growing needs of all electronics & electrical test and measuring equipments in Singapore. Beside handling sales and marketing for our products, we also provide value added services like repair and calibration for our range of products.
About CETM
Events & Exhibitions
Coming up....
Browse By Category
THERMOGRAPHY & TEMPERATURE
Thermography
Portable Industrial Thermometers
Stationary Industrial IR Cameras & Thermometers
NETWORK, TELECOMS & CCTV
Wifi Testers
Cabling Cerfications
Telecom Testers
HIGH VOLTAGE, UTILTIES & CABLING
Motor & Generator Testers
Cable Avoidance & Cable Locators
High Voltage Detectors
Cable Test Equipments
Circuit Breaker Test Equipments
Relay and Protection Testers
Transformer Testing Equipments
Insulation Test Equipments
Resistance & Battery Testers
Partial Discharge & Corona Detection
Earth/Ground Resistance Testers
RENTAL & CLEARANCE
Filter By
Filter By
Home
Subcategories
IDR0.00
(tax incl.)
The 885 and 886 high accuracy LCR/ESR meters were the first handheld meters of their type on the market, offering fast, reliable, and versatile testing at a low cost. With a wide range of test frequencies up to 10 kHz...
IDR0.00
(tax incl.)
The 894 and 895 are high accuracy LCR meters capable of measuring inductance, capacitance, and resistance of components and materials at DC or from 20 Hz to 500 kHz or 1 MHz respectively. These LCR meters provide...
IDR0.00
(tax incl.)
This handy capacitance meter (to 20 mF) and ohm meter (to 20M ohm) also tests: transistors, beta, diodes, SCRs, LEDs and batteries.
IDR0.00
(tax incl.)
The new B&K Precision 2510B Series 100 MHz and 200 MHz Handheld Digital Storage Oscilloscopes offer floating measurement and recorder capabilities in a compact, lightweight package. Replacing the bestselling 2510...
IDR0.00
(tax incl.)
The 885 and 886 high accuracy LCR/ESR meters were the first handheld meters of their type on the market, offering fast, reliable, and versatile testing at a low cost. With a wide range of test frequencies up to 10 kHz...
IDR0.00
(tax incl.)
The 894 and 895 are high accuracy LCR meters capable of measuring inductance, capacitance, and resistance of components and materials at DC or from 20 Hz to 500 kHz or 1 MHz respectively. These LCR meters provide...
IDR0.00
(tax incl.)
The 2840 Series DC resistance meters feature high accuracy and resolution measurements in the milliohm range. Both meters are ideally suited for measuring contact resistance of relays, switches, and PCB traces,...
IDR0.00
(tax incl.)
The B&K Precision Model 889B Synthesized LCR/ESR Meter with Component Tester is a high accuracy test instrument used for measuring inductors, capacitors and resistors with a basic accuracy of 0.1%. Also, with the...
IDR0.00
(tax incl.)
The Model 810C Capacitance Meter is a compact capacitance meter, designed for accurate measurement of capacitive components. It features direct plug in test sockets and test lead jacks. A zero adjustment knob is also...
IDR0.00
(tax incl.)
The 878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly and precisely. The 879B and 880 also measures impedance, Theta, DCR, and ESR. Additionally, the 880...
IDR0.00
(tax incl.)
The 891 Bench LCR meter is capable of measuring inductors, capacitors, and resistors at DC or from 20 Hz to 300 kHz. The instrument's compact 2U half-rack form factor is suitable for the bench or rack mount...
IDR0.00
(tax incl.)
The 830C and 890C are 11,000-count handheld capacitance meters that measure capacitance up to 200 mF (50 mF for 890C). Straightforward to operate, these meters make measurements quickly and simplify the capacitance...
IDR0.00
(tax incl.)
The 878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly and precisely. The 879B and 880 also measures impedance, Theta, DCR, and ESR. Additionally, the 880...
IDR0.00
(tax incl.)
The 2840 Series DC resistance meters feature high accuracy and resolution measurements in the milliohm range. Both meters are ideally suited for measuring contact resistance of relays, switches, and PCB traces,...
IDR0.00
(tax incl.)
The 830C and 890C are 11,000-count handheld capacitance meters that measure capacitance up to 200 mF (50 mF for 890C). Straightforward to operate, these meters make measurements quickly and simplify the capacitance...
IDR0.00
(tax incl.)
878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly and precisely. The 879B and 880 also measures impedance, Theta, DCR, and ESR.
This item is not available...
IDR0.00
(tax incl.)
Tested to extremes every single component in TOUGHPIX DIGITHERM has been selected with one goal in mind, quality that’s built to last. From being frozen to -20C and dropped from a metre, to being blasted with water...
IDR0.00
(tax incl.)
on-Invasive, next generation thickness gauge, UT5000 is the thickness gauge of choice for rugged environments
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
IDR0.00
(tax incl.)
The TOUGHPIX DIGITHERM is a ruggedized, compact, high resolution digital imaging camera capable of capturing true 5MP visual images along with fully radiometric thermal images.
This item is not available for sale...
IDR0.00
(tax incl.)
Hand tachometer up to 99,999 rpm / Automatic mode / MAX / MIN / AVG mode / Illuminated LCD / Data hold function
IDR0.00
(tax incl.)
Key Features:
Small and compact design
Measuring range -10 … 50 °C / 14 … 122 °F
Various measurement functions
Temperature and humidity sensor
Low power consumption
Selectable unit
IDR0.00
(tax incl.)
The advanced water analyzer stands for precision, user-friendliness and GLP conformity (Good Laboratory Practice). With a high-resolution LCD display, the water analyzer enables a clear and concise display of the...
IDR0.00
(tax incl.)
For tensile force measurement and pressure force measurement up to 10 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software
IDR0.00
(tax incl.)
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on...
IDR0.00
(tax incl.)
The material tester is used wherever a fast hardness test has to be carried out. It is possible with the material tester to determine the surface hardness of many metals. The material tester is particularly suitable...
IDR0.00
(tax incl.)
The lux measuring device / lux meter is a highly developed instrument that is characterized by its versatility and precision. With its dual measurement channels, the lux measuring device / lux meter enables the...
IDR0.00
(tax incl.)
Sound calibrator for mobile use / For various evaluation filters / Accuracy IEC 942, class 1 / For microphones with different dimensions
IDR0.00
(tax incl.)
The PCE-Instruments PCE-2000N hardness meter uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on...
IDR0.00
(tax incl.)
The 4-channel temperature data logger for thermocouples allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples. Notably,...
IDR0.00
(tax incl.)
The light data logger has a large measuring range of 0 ... 400 kLux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the light meter can be positioned...
IDR0.00
(tax incl.)
Climate meter with Beaufort scale / Wind direction display / Measuring range 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s / Data memory for 960 measured values / Software for transferring the measured values / Velocity and...
IDR0.00
(tax incl.)
The water hardness tester is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the water hardness tester. With this water hardness tester, for example,...
IDR0.00
(tax incl.)
The heat pump measuring device is ideal for all refrigeration system builders and technicians for refrigerant extraction. It can be used for refrigerants of classes A1, A2L, and A2. The compact heat pump measuring...
IDR0.00
(tax incl.)
The air quality monitor from PCE Instruments is a true all-rounder when it goes about the quality of the indoor air. The air quality monitor quickly and accurately determines several environmental parameters that are...
IDR0.00
(tax incl.)
PCE-LD 1 is a portable handheld leak detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other...
IDR0.00
(tax incl.)
The installation tester is a multifunctional measuring device that is suitable for testing electrical safety in accordance with the EN 61557 and DIN VDE 0100 standards. It offers many functions that are specifically...
IDR0.00
(tax incl.)
Class II sound level meter with data-logging functionality / Measuring range: 30 ... 130 dB / Memory stores up to 32,700 readings / USB port / Microsoft Excel compatible / Analog output
IDR0.00
(tax incl.)
The analytical balance is a high-precision analytical balance with a measuring range of up to 220 g. The analytical balance has a resolution of 0.1 mg. Due to this low resolution, even the smallest air turbulence in a...
IDR0.00
(tax incl.)
Regular calibration of temperature sensors is critical because they are exposed to a variety of mechanical, thermal and chemical stresses that can cause drift over time. This drift can cause the measured temperature...
IDR0.00
(tax incl.)
CO2 meter / Battery operation / Alarm limits / 400 ... 5000 ppm / Temperature measurement / Visual and acoustic alarm / Automatic switch-off / USB charging / Units can be changed / LC display / Temperature range -10...
IDR0.00
(tax incl.)
A distinctive feature of the accelerometer is the ability to work in the following modes: Classic vibrometer - means using the device as an indicator of the overall vibration level, measuring peak values, displacement...
IDR0.00
(tax incl.)
The Radiation Meter is a small sensitive radiation meter used for monitoring X-rays, gamma and beta radiation. The Radiation Meter uses an energy compensated Geiger-Müller counting tube as detector for accurate...
IDR0.00
(tax incl.)
Coating Thickness Gauge with convenient one-hand operation / MIN MAX and MEAN display / Battery indicator / various units / automatic shutdown / for ferrous and non-ferrous metals / small and compact design
IDR0.00
(tax incl.)
PCE-SMM 1 is an absolute moisture meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter...
IDR0.00
(tax incl.)
The WiFi videoscope with the 4-way camera head is a versatile tool for visual inspection and image capture in hard-to-reach areas. With a flexible cable length of 1 meter, the WiFi videoscope provides the necessary...
IDR0.00
(tax incl.)
Force gauge for tensile force measurement and pressure force measurement up to 200 N
USB interface and downloadable evaluation software for data transmission / Many measuring adapters
IDR0.00
(tax incl.)
PCE-CT 65 is a Thickness Meter that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and...
IDR0.00
(tax incl.)
This wireless weather station is a true all-rounder that leaves little to be desired. Whether at home or in the office, the wireless weather station will delight the operator with its versatility. This weather station...
IDR0.00
(tax incl.)
The force gauge can be used to measure both tensile and compressive forces with high accuracy. Tensile and compressive forces are often measured in the test laboratory. For example, to determine the yield point, the...
IDR0.00
(tax incl.)
Professional sound level meter with GPS PCE-432 (class 1) incl. outdoor noise level meter kit
Handheld noise meter / Octave band filter / A, B, C and Z rating filter upgradeable / Fast, Slow and Pulse Evaluation /...
IDR0.00
(tax incl.)
The Leeb Portable Metal Hardness Tester PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the hardness tester a firing pin bounces on a metallic surface and the...
IDR0.00
(tax incl.)
PCE-VE 200 is an industrial borescope, inspection camera or endoscope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable...
IDR0.00
(tax incl.)
The power meter is a compact instrument for measuring and displaying various network parameters in three-phase networks. This power meter can record the energy values of individual consumers or electrical feeders. In...
IDR0.00
(tax incl.)
Moisture meter with eight spring electrodes / Many scales already deposited / Non-destructive measurement on floors and walls / Large graphic display / Measurement display both numerical and graphical / Max HOLD...
IDR0.00
(tax incl.)
The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer,...
IDR0.00
(tax incl.)
Introducing the Manifold PCE-HVAC 10, the ultimate solution for all your HVAC installation, maintenance, and optimization needs. Our product offers a comprehensive range of features including assistance with heat...
IDR0.00
(tax incl.)
The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on...
IDR0.00
(tax incl.)
PCE-NDL 10 is a high-quality noise dose meter or sound level meter with data logging capabilities. This noise dosimeter records sound pressure level (SPL) measurements as well as dosimetry (dose) measurements in...
IDR0.00
(tax incl.)
The installation tester is a multifunctional measuring device that is suitable for testing electrical safety in accordance with the EN 61557 and DIN VDE 0100 standards. It offers many functions that are specifically...
IDR0.00
(tax incl.)
PCE-PMI 2 Concrete Moisture Meter
For nondestructive measurement of the moisture content of concrete, cement, gypsum, wood, plaster, mortar and more
IDR0.00
(tax incl.)
PCE-CT 27FN is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing,...
IDR0.00
(tax incl.)
The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined...
IDR0.00
(tax incl.)
The multi channel temperature data logger offers precise temperature monitoring. With a measuring range of -210 to 1370 °C and support for thermocouple types K and J, it enables accurate measurements in different...
IDR0.00
(tax incl.)
Dust measuring device for indicative measurement / Adjustable alarm limits / Data logger / Micro USB charging interface / Measuring range 0 ... 1000 µg/m³ / Mass concentration /
IDR0.00
(tax incl.)
The shock data loggers of the PCE-VDL series are available in two versions. The shock data logger PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis...
IDR0.00
(tax incl.)
The radioactivity meter is a small, highly sensitive radiation warning device mainly used for monitoring X, ß and y. Black and white illuminated OLED display that is clearly visible even at night. It has a warning...
IDR0.00
(tax incl.)
The air quality meter is equipped with various sensors to determine HCHO, TVOC, ambient temperature and ambient humidity. This means that the air quality meter already covers a wide range of measurement tasks. The...
IDR0.00
(tax incl.)
With a measuring range of 2,400 mT, the Electromagnetic Field Meter covers a wide range of measuring tasks. The field strength meter has an accuracy of 1%. This makes the Electromagnetic Field Meter a very precise...
IDR0.00
(tax incl.)
The power analyzer redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The power analyzer allows accurate measurements of...
IDR0.00
(tax incl.)
The gas leak detector PCE-GA 12 is a very easy-to-use measuring device. This gas leak detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected...
IDR0.00
(tax incl.)
The CO2 data logger PCE-AQD 10 is used to measure air quality. The CO2 data logger measures carbon dioxide, temperature and humidity. The CO2 sensor from the CO2 data logger is separated from the main unit with a...
IDR0.00
(tax incl.)
The food hygiene / hygiene test equipment is a powerful instrument that has been specially developed for determining the water activity in various materials. With a measuring range of 0.00 to 1.00 aw, this food...
IDR0.00
(tax incl.)
Portable high-accuracy decibel meter with 1/1 octave band filter (optional 1/3 octave band filter upgrade)
IDR0.00
(tax incl.)
The thickness gauge is a measuring device for the non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the...
IDR0.00
(tax incl.)
The HDV600 videoscope features eight kit options with camera probes to fit your application needs. Choose from a range of probe lengths and camera diameters with articulating and/or wireless features.